How to Install a Band Video Doorbell in 10 Easy Steps

The Band video doorbell camera is pretty sweet, only what if you're non tech savvy?

Don't worry—installing a Ring doorbell is easier than you lot call back. We've put together some easy-to-follow steps based on our own Ring installation experiences, and we've as well thrown in a few bonus pro tips and tricks from an experienced technician to help make your Ring doorbell cam installation a breeze.

Watch our video on Ring camera encryption

Subscribe to ourYoutube aqueduct  for more videos like this one! Larn how to protect your habitation, your loved ones, yourself and your belongings.

Step 1: Assemble tools

While each Ring doorbell kit contains different extras, they all come up with pretty much everything you demand to install your doorbell, including a screwdriver, screws, a charging cablevision (if needed), and installation instructions.

In addition to these, you may need a drill if you have to screw your Ring Doorbell into brick or stucco. The Ring Video Doorbell 2 and the Band Video Doorbell Pro come with a special masonry drill fleck to brand that part easier. We also recommend that you have a box cutter or flathead screwdriver on manus to help yous remove your former doorbell.

ring screwdriver

Epitome: Celeste Tholen, SafeWise

Footstep 2: Charge the battery

If you're installing a Ring Video Doorbell Pro, y'all tin skip this pace.

Once you have your Band unboxed, locate the battery and plug it into power using the included charging cable. We've learned that it can be catchy to become the battery out of the Band 2 because it's designed for easy pop-out after the doorbell has already been mounted.

We suggest that you concord it against a flat vertical surface (like a wall) to remove it. The wall helps to push button the battery out and gravity helps it drib downwardly into your manus.

how to install ring doorbell

Image: Celeste Tholen, SafeWise

With your battery plugged in you should come across a red calorie-free and a green calorie-free to indicate the battery is charging. Charging may take four to 6 hours, so be patient. Once the bombardment is fully charged, the red light will plow off and you'll literally have the green light to become started with installation.

Step iii: Connect to internet

Download the Ring app and follow the onscreen instructions to link your Band Video Doorbell to your home's Wi-Fi network. The app volition walk yous through everything yous need to do, and information technology takes only virtually 10 minutes to go it all set up and continued.

*Amazon.com cost as of 9/22/2021 at 7:00 a.m. (MT). Read full disclaimer.

If your Wi-Fi signal just isn't strong enough to connect to your Ring video doorbell, consider getting the Ring Chime.

  • Plugs into standard outlet
  • Boosts Wi-Fi signal
  • Works as doorbell chime

Step four: Shut off power

Get to your home's breaker box (usually in a garage, basement, or in the rear of your home) and shut off power to your doorbell. This is for rubber reasons since you'll exist working with exposed wiring.

Skip this step if yous don't accept an existing doorbell and therefore won't be footling with wires. Several Ring doorbell cameras use batteries, so hardwiring is optional.

Step 5: Remove sometime doorbell

Employ a screwdriver or boxcutter to remove your old doorbell's faceplate, exposing the screws. Unscrew the old doorbell from the wall and gently pull it out, exposing the two power wires.

The doorbell wires should still be wound around screws on the within of the onetime doorbell, then be careful with this function, as you don't desire to impairment these wires past pulling too hard. Loosen the screws to disassemble the wires and take the quondam doorbell off completely.

Step 6: Attach mounting bracket

At this signal, your wall should just have the pigsty where your former doorbell used to be, with the ii doorbell wires hanging out. Before you adhere your mounting subclass, open up your Ring app and the doorbell's live video feed.

  • Agree your Ring Doorbell up against the surface over the pigsty in the aforementioned spot where you're going to mount it and check the motion picture on your phone to make sure y'all're getting the bending yous desire. If y'all're not, now is the time to utilize one of the angled mounting brackets to tilt the camera upwards, downwardly, left, or right.
  • Once you've decided on placement, use the included level tool to brand certain the mounting subclass is straight, and utilise a pencil to mark the location for the new screw holes. Once they're marked, remove the level.
  • If y'all're using an angled mount, go ahead and attach it to the wall outset by screwing it in, then attach the mounting bracket to it. Otherwise, spiral the mounting bracket directly to the wall over the hole left by your old doorbell so the wiring comes through the bracket's hole.

Annotation: If you're installing on brick or stucco, you'll demand to utilise the included masonry flake to drill holes for the small, white plastic anchors used to agree screws in place. Afterwards yous drill the holes in the locations yous marked, push the anchors in, position the mounting bracket on top of them, and then screw the mounting bracket screws into the anchors. If you have wood or vinyl siding, don't worry about using the anchors.

Stride seven: Attach doorbell wires (optional)

If you want to connect your Band to your current doorbell chime to prolong its battery life or make your chime ring when a visitor presses the doorbell button, you can at present attach those two doorbell wires to your Band.

If you don't have an existing doorbell, y'all can skip this part. Only make sure you purchase a Ring Chime for a traditional doorbell experience. Otherwise, you can rely on phone notifications to alert you when someone's at the door.

Outset, loosen the ii screws on the mounting bracket that are located directly over the hole where the wiring is sticking out of your wall. Then, take the wires and wrap one around each screw—information technology doesn't thing which 1, equally long as the wires aren't touching. Make certain each has a expert connection to the screw. Tighten the screws gently if needed. Congratulations! Y'all've at present closed the circuit.

Note:If you accept a digital doorbell chime (ane that makes more of an electronic ii-toned sound than the traditional "ding dong" chime), then this is the perfect time to adhere the included diode. Check your installation instructions for more data near this step.

Footstep viii: Mount Ring doorbell

We've finally reached the exciting part. Position your Band Video Doorbell just to a higher place the bracket and press in and down until it clicks into place. It'due south okay to utilise a fiddling bit of force on this step.

Step 9: Restore power

Fourth dimension to flip that breaker switch again to make your device live. Go ahead and examination it out and make sure everything is working. If yous accept your Ring Video Doorbell wired to your interior chime and information technology's non chiming, remove the faceplate and double-check that your connections are secure. (If you have a digital chime, at present is likewise a proficient time to reverse your diode if necessary.)

If everything seems to exist in order, you can screw the two included security screws into the underside of the faceplate using the small end of the included screwdriver.

ring doorbell faceplate

ring doorbell installation

Images: Celeste Tholen, SafeWise

Pace 10: Gear up app preferences

Your Band Doorbell installation is complete. Now yous tin can employ your Ring app to play with features, set your motion detection and night vision settings, cull what kinds of notifications you want, and select what areas you want your camera to encompass.

Compare Ring video doorbells

Doorbell

Price

Ability source

Installation type

Video quality

Field of view

Learn more

Best value

Ring Video Doorbell (2nd gen) Band Video Doorbell (2nd Gen)

Battery, wired

DIY

1080p

155º

Best overall

Ring Video Doorbell 4

Battery, wired DIY 1080p 160º
Best for budgets

Ring Video Doorbell Wired

Wired only DIY 1080p 155°
Best for style

Ring Video Doorbell Pro 2 product image Ring Video Doorbell Pro two

Wired just

DIY

1536p

150º

Best for renters

Ring Peephole camera product image Ring Peephole Cam

Battery only

DIY

1080p

155º

Best for new construction

Ring Elite Doorbell product images Band Video Doorbell Elite

Wired (Ability over Ethernet)

Professional recommended

1080p

160º

*Amazon.com list price as of ix/22/2021 at 7:00 a.m. (MT). Read full disclaimer.

Ring doorbell installation FAQ

Both doorbells accept a camera with high-definition video, a motion sensor, two-way communication, and on-demand video. Nest Hello has pre-recorded messages y'all can play for visitors if y'all're not available to talk, but Band doesn't. Nest has 24/7 video recording, simply Band records but motion-triggered events. Ring costs about $twenty more, but its cloud subscription fee costs $2 less a month than Nest's.

The Ring Doorbell screw size is a T6. If you ever lose a spiral or demand Ring Doorbell replacement parts, you lot can discover them onRing.

Related articles on SafeWise

Compare the best abode security systems

Brand

Best for

Lowest monitoring cost

Starter equipment cost

Contract required

Smart domicile compatibility Icon Tooltip  Dark

Learn more than

Read review

Vivint Vivint

All-time overall $599.00

Icon Yes  Light No *

Amazon,
Google,
Z-Wave

Frontpoint Frontpoint

High-end DIY option $129.00

Icon Yes  Light No

Amazon,
Google,
Z-Wave

SimpliSafe SimpliSafe

Reader favorite $229.00

Icon Yes  Light No

Amazon,
Google

Cove Cove

All-time customer feel Quote required

Icon Yes  Light No *

Amazon,
Google

ADT ADT

About experienced $0.00

Icon No  Light Yep

Amazon,
Google,
Z-Moving ridge

Abode Dwelling

Best DIY automation $279.00

Icon Yes  Light No

Amazon, Apple, Google, Z-Wave, Zigbee

Ring Ring

Best outdoor cameras $199.99

Icon Yes  Light No

Amazon,
Google,
Z-Wave

Blue by ADT Blue by ADT

Best optional monitoring $199.15

Icon Yes  Light No

Amazon,
Google,
Z-Wave

WYZE Wyze

Best budget pick $85.98

Icon Yes  Light No

Amazon,
Google

Brinks Brinks

Most rubber sensor options $199.00

Icon No  Light Yeah

Amazon,
Google,
Z-Moving ridge

Product prices and availability are accurate every bit of the date/time indicated and are subject to change. Whatever cost and availability information displayed on Amazon at the time of purchase will use to the purchase of this product. Safewise.com utilizes paid Amazon links.

Certain content that appears on this site comes from Amazon. This content is provided "as is" and is subject to alter or removal at whatsoever time.

Kasey Tross

Written by

Kasey Tross

Kasey is a trained Community Emergency Response Team (CERT) member and a freelance writer with expertise in emergency preparedness and security. As the female parent of iv kids, including two teens, Kasey knows the safety concerns parents confront as they raise tech-savvy kids in a connected globe, and she loves to research the latest security options for her ain family and for SafeWise readers.

Recent Articles